Sumitomo Demag SE-EV-A-HD Series

Mid-Sized All-Electric Machines, 247 to 562 U.S. tons


SE220EV-A-HD, SE250EV-A-HD, SE280EV-A-HD, SE315EV-A-HD, SE350EV-A-HD, SE385EV-A-HD, SE450EV-A-HD and SE500EV-A-HD

Sumitomo (SHI) Demag’s mid-sized, high-duty all-electric SE-EV-A-HD Series of injection molding machines is available in 8 model sizes ranging from 247 to 562 U.S. tons. The series combines significantly increased specifications with advanced technologies resulting in a substantially different mid-sized machine series that:


  • Brings the precision, productivity and profitability benefits of all-electric injection molding machine technology to applications with larger, heavier and more complex molds
  • Efficiently handles higher injection requirements that would typically have been run on a hybrid or hydraulic machine
  • Allows bigger parts to run on smaller machines
  • “Meets or beats” specifications of other competitors’ next model size up all-electrics

What makes the SE-EV-A-HD different from other mid-size machines is the unique combination of robust, best-in-class specifications with exclusive technologies that reduce injection and clamp force requirements. This combination is key to the SE-EV-A-HD’s capability to compete with other manufacturers’ next model size up machines and to handle larger parts and molds with ease.


Design Features

Increased specifications and modified and/or advanced design features can be found from end to end on the SE-EV-A-HD:

  • ahdmoldareaTie bar spacing was increased by an average of 8% in the traverse direction and 15% in the longitudinal direction compared with the predecessor SE-HDZ Series, and is the highest among machines of the same class. The square configuration of the tie bar spacing also allows molds to be loaded from the side.
  • Bushing-free tie bars keep the mold area clean and free of grease
  • The mold opening stroke is 25 mm wider than the SE-HDZ and the mold thickness range can be optionally extended by 100 mm for all model sizes and 200 mm for some model sizes
  • The ejector stroke is 220 mm for all model sizes, and is the largest among all machines of the same class
  • A stronger, more rigid frame construction has increased the allowable maximum mold weight by an average of 22% compared with the SE-HDZ
  • The new linear guidance system is supplied as a standard feature to ensure that even heavy molds open and close smoothly and parallelism is maintained
  • The improved Double Center Press Platen (DCPP) design further reduces surface pressure inconsistencies inside the mold by 15%
  • The Clamp Force Feedback Control system automatically compensates for any thermal expansion of the mold
  • The series is available with larger injection units with higher duty motors and drives capable of higher and longer peak injection pressures. Hold pressures, up to 33,359 psi (2345 kgf/cm2) exactly match injection pressures, and all models are equipped to deliver full power for up to 40% of the cycle.
  • For added application flexibility, an optional high-duty filling specification for thin-wall products raises the maximum injection speed to 220 mm/s
  • NC10A greater choice of screw diameters is provided including large diameter screws up to 90 mm (dependent on injection unit size)
  • The high-contact-force (nozzle touch) system, with selectable settings of 4.5, 5.6 and 6.7 tons, is equal to a hydraulic or hybrid machine and ensures compatibility with various mold types (hot runner, cold runner, floating sprue bushings, etc.)
  • NC-10 control improved with wider viewing angle and increased touchscreen sensitivity

Sumitomo (SHI) Demag Exclusive Technologies

Sumitomo Demag exclusive technologies that are used in the SE-EV-AHD include:

  • A new technology called S-MOVE that replaces multi-step mold open/close speed settings with an optimized speed pattern that is both smoother and 15% faster. This, combined with exceptionally fast clamp open/close speeds up to 56.6 in/s (1438 mm/s), can significantly shorten cycle times.
  • Zero-Molding’s Flow Front Control (FFC) system that achieves complete and balanced filling with reduced injection pressure. FFC takes advantage of the energy in the flow front of the resin to complete filling in an even fashion as opposed to forcing material into open areas and thus flashing the areas that were already filled.
  • Zero-Molding’s Minimum Clamping Molding (MCM) system that reduces clamp force requirements and ensures optimized venting of gases and flash-free molding. MCM allows the machine to automatically detect the minimum point at which the mold halves are completely parallel and defines the threshold where flash-free molding can occur and the optimum point at which the best cavity venting exists.
  • Zero-Molding’s Simple Process Setting (SPS) system that provides fast, guided setup, ease of use and machine optimization

Rapid Return on Investment

Molders will experience a rapid return on investment (ROI) with the SE-EV-A-HD due to the application flexibility, the ability to run larger molds on smaller machines and the overall productivity of the series. Productivity factors contributing to the rapid ROI include:

  • Significant energy savings due to exceptionally energy-efficient, low-inertia motors and low-friction design improvements
  • Reduced water and grease use
  • Faster start-up
  • Reduced scrap
  • Faster cycle times
  • Reduced downtime
  • Quick mold change
  • Minimized preventive maintenance
  • Ability for unmanned and lights out operation

The SE-EV-A-HD is backed by a comprehensive Customer Satisfaction Program with Sumitomo (SHI) Demag’s standard-setting warranty program, worry-free parts, responsive field service and financing availability – plus advantages such as expert processing assistance.


Sumitomo (SHI) Demag’s new mid-sized, high-duty all-electric SE-EV-A-HD Series injection molding machines are available in models from 247 to 562 U.S. tons (2200 to 5000 kN). Using the links below, printable pdf file spec sheets are provided for each model size in both English and metric units.

Including NEW CT-6 SPEC for High-Speed Applications

The full technical specifications brochure lists all options and is a more comprehensive source for information (Metric):

SE-EV-A HD Tech Specs

SE220EV-A-HD — 247 U.S. tons, injection weight (GPPS) range 11.4 – 27.4 oz (323 – 778 grams)
English Specs      Metric Specs

SE250EV-A-HD — 281 U.S. tons, injection weight (GPPS) range 11.4 – 27.4 oz (323 – 778 grams)
English Specs      Metric Specs

SE280EV-A-HD — 315 U.S. tons, injection weight (GPPS) range 17.3 – 54.5 oz (490 – 1544 grams)
English Specs      Metric Specs

SE315EV-A-HD — 354 U.S. tons, injection weight (GPPS) range 17.3 – 54.5 oz (490 – 1544 grams)
English Specs      Metric Specs

SE350EV-A-HD — 393 U.S. tons, injection weight (GPPS) range 17.3 – 54.5 oz (490 – 1544 grams)
English Specs      Metric Specs

SE385EV-A-HD — 433 U.S. tons, injection weight (GPPS) range 17.3 – 54.5 oz (490 – 1544 grams)
English Specs      Metric Specs

SE450EV-A-HD — 506 U.S. tons, injection weight (GPPS) range 33.8 – 77.5 oz (957 – 2198 grams)
English Specs      Metric Specs

SE500EV-A-HD — 562 U.S. tons, injection weight (GPPS) range 33.8 – 77.5 oz (957 – 2198 grams)
English Specs      Metric Specs

Shopping cart0
There are no products in the cart!
Continue shopping