SMARTFLOW® Tracer®VM Base Electronic Flowmeters

The TracerVM Base Flowmeter is a non-display sensor that provides voltage outputs for process flow rate and temperature. Vortex sensor technology is highly accurate and repeatable without moving parts. Flow reading is direction specific. Refer to the arrow on the body for correct installation. Connection to the process is made using standard pipe threads in NPT or BSP from 3/8″ through 1-1/2″. Flow body materials are corrosion-resistant brass, nylon, anodized aluminum and stainless steel. The flowmeter is designed for use in industrial water applications such as injection mold cooling or filter and pump monitoring.

Part No. VM Categories: ,

Features and Benefits

  • No moving parts for reliable operation
  • Flow and Temperature Sensors in one unit for compact installation
  • Quick temperature response from direct media contact
  • Economical and versatile construction with corrosion-resistant materials
  • Optional Delta-Q® Flow Regulator adds functionality in support of Scientific Cooling principles
  • Installs easily onto Smartflow Stainless Steel or Aluminum Manifolds to interface with Smartlink™ for total injection mold cooling water process control

Specifications

Connection Size Flow Range GPM Flow Range LPM Voltage Output
3/8″ or 1/2″ .3 to 4.8 GPM 1 to 18 LPM 0.5 – 4.1V
3/8″ or 1/2″ .5 to 10.6 GPM 2 to 40 LPM 0.5 – 3.5V
3/4″ or 1″ 1.3 to 26.4 GPM 5 to 100 LPM 0.5 – 3.5V
1″ or 1-1/2″ 2.6 to 52.8 GPM 10 to 200 LPM 0.5 – 3.5V

 

Materials:

  • Sensing Element – Silicone-Based MEMS Sensor
  • Seal (sensor to housing) – EPDM Rubber
  • Insert – PPA 40 GF
  • 3/8″ & 1/2″ Body Size – Glass-Filled Nylon Flow Body with Brass or Nylon End Caps
  • 3/4″ thru 1-1/2″ Body Size – Anodized Aluminum or Stainless Steel Flow Body

Power:

  • Power Required – 5VDC ±5% (not included)
  • Power Consumption – < 50mW
  • Load Impedance – > 10kΩ

Output:

  • Output signals – Ratiometric
  • Flow Signal – 0.5 – 3.5V or 0.5 – 4.1V (1 – 18LPM only)
    (zero flow at 0.35V)
  • Flow Accuracy – ±1.5% of full scale
  • Temperature Signal – 0.5 – 4.1V
  • Temperature Accuracy – ±0.5°C

Operating Temperature: 0°C to 120°C (32°F to 248°F)

Operating Pressure: 10.3 bar max. (150 psi max.)

Builder

Shopping cart0
There are no products in the cart!
Continue shopping
0