SMARTFLOW® Mold Temperature Regulators

The Smartflow® Mold Temperature Regulator effectively controls mold cooling water temperature between 80°F and 120°F (27°C and 49°C) to maintain a steady mold temperature. Installed to control water flow exiting an injection mold, the Mold Temperature Regulator quietly recovers waste heat from the resin shot, working without electricity to reduce shop floor clutter and cut production costs. In many cases, it is a simple, inexpensive substitute for a conventional electric mold heater

Features and Benefits

  • Replaces conventional mold heaters
  • Low cost
  • Holds temperature regardless of variables
  • Unaffected by pressure changes
  • Control different temperature zones with multiple units
  • Unaffected by supply water temperature changes
  • Low maintenance
  • Uses no electricity
  • No floor space required

Click to download Mold Temperature Regulator catalog

Click to download Mold Temperature Regulator instructions

Click for additional application information

Part No. WDT2 Categories: ,

Specifications

Physical

Material……………………..All wetted parts are Electroless Nickel-Plated Brass & Stainless Steel
O-Rings ……………………Buna-N
Inlet Size …………………..1/4″ NPT(F)
Outlet Size…………………1/2″ NPT(F)
Maximum Pressure …….125 psi (8.6 bar)
Weight ………………………3 lbs (1.5 kg)

Operating

Regulator
Cooling water set point range …………80° to 120°F (27° to 49°C)
Accuracy…………………………….±1°F Full Scale
Flow capacity ……………………….5 to 25 gallons (19 to 95 liters) per hour
Regulator operation is more accurate than dial thermometer.

Dial Thermometer
Range………………………………0 to 250°F (-18 to 121°C)
Accuracy…………………..±1°F Mid Scale ±2°F Full Scale

Shopping cart0
There are no products in the cart!
Continue shopping
0